• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to move around the house whenever it wants is a great method to keep your pet active and mentally stimulated. A flap can aid in reducing toilet accidents by making it easier for your cat to exit the house whenever it wants to.

Take a measurement of the door

A cat flap allows your pet to move around as they'd like without needing to open the door. This makes it perfect to keep them in the house when you're home or away, and helps keep unwanted pests from the house as well!

It is important to measure the door to ensure you get the right size cat flap. There are a variety of sizes available. You can then ensure that the cat flap is the proper size for your door made of upvc. Otherwise, it may be too big or small and your cat might have trouble using it.

Take a ruler, and determine the width at several places along the edges of the door. You should also measure the height of the door in a few places. This is because a door that is too high will cause your cat flap in bifold doors to do a gymnast's routine every time they want to use the flap!

Ask a glazier for assistance if you aren't sure how to measure the door. They will be able determine if your door is suitable for cat flaps and can give you advice on the right size flap to buy.

Draw the outline of the hole on your door once you have the measurements. This will aid you when cutting the hole and save you money!

Make sure to put the hole in the right place. If you're fitting a cat flap in a upvc door (Read the Full Content) the cat flap onto a patio door it is vital that the hole does not reach too close to the hinges. This could result in leakage or problems with the seal.

It is best to delegate the job of installing the cat flap onto the glass door to an experienced glazier. It can be a challenge to insert a cat flap into the glass pane, and you may be surprised to find that the process causes it to crack and lose its weatherproof seal.

Measure the Cat

A cat flap installation bristol flap permits your pet to go and come whenever they want without having to leave them home on their own. It also helps keep draughts out of your home, which isn't good for either you or your cat!

However, if you have a uPVC or composite door, it may be difficult to install the cat flap. These kinds of doors are usually constructed with different materials than standard wooden or uPVC doors and the process of installing them is different, too. Make sure you check with the manufacturer if the door is compatible before you install the cat flap on your uPVC composite or uPVC door. Modifications can invalidate warranties.

Generally speaking, these types of doors are built to be tough and durable with insulation included. This makes them more resistant to the elements of weather than other doors, however they can be a challenge to insert an animal flap. If you're unsure about whether your uPVC or composite door will accommodate a cat flap, check with a professional joiner prior to starting.

You'll have to measure their height in order to make sure they pass through the door. This is easier when they're sleeping or calm, so that they don't move around too often. Once you know their height you can measure the distance from their stomach to the floor to determine the location of the bottom of the flap. This position can be outlined on the door.

If you are using power tools to cut your uPVC door or composite door, you have be extra cautious. The drilling process can make cracks, particularly if the area is composed of toughened glass. This is the reason it's recommended to engage an experienced glazier when putting your cat flap into glass. This will stop the glass from breaking or becoming hard. A Glazier will also be in a position to provide you with a circular cat flap that is less likely to break and safer for your cat flap install to use.

Cut the Hole

A good cat flap will come with a template drawing that you can use to mark the area on your door where the hole should be. If it doesn't, you can create your own by with a thin piece of paper (tracing papers are great). After the shape is drawn on the door you can then use your spirit level to ensure that the shape is horizontal. This will ensure that your cat flap is positioned correctly in the opening, and it will not open or close.

Then, make use of a jigsaw to cut out the pattern that is marked on the door. Use a blade designed specifically for uPVC doors. It is usually labeled with this information. If not you can ask the staff at the DIY store for assistance. Once you have the hole cut out then place the flap up against it and push it out to ensure that the flap's action is smooth. If it is bound at any point, you can use the filer or the rasp to fix this.

You should also check that there are no electric cables or gas pipes inside the door that you will be cutting through as they could be damaged by the Jigsaw. Be aware of any handles, or other fittings on the door which must be removed to accommodate the cat flap. Be careful not to damage these items during the process.

Most people who install the cat flap themselves have a standard solid uPVC door and will not have to worry about any of these issues. If your door is made of wood or has a decorative element that cannot be removed, this can make the task.

For these types of jobs, it is recommended to seek out expert guidance from a cat-flap fitting expert. It is essential to perform them correctly to avoid any future issues. It is important to do it right because getting it wrong could damage the door and invalidate the warranty.

Install the Flap

After you've cut your hole, you can place the flap and check if it opens and fits. If you notice any points that stick or catch or stick, use a hand-file or sandpaper to smooth them down until they are able to fit and can be opened without issue. Make sure the flap is flush with the door.

If your tool doesn't have an example, you could make use of thin paper such as tracing or Acetate. Place the paper against the door and mark a line where you want to position the flap (this will be your cutting guide). Then using the pencil lines you've drawn on the door, mark four screw holes in the corners of the flap - these will be the screws that you'll use to secure the flap into place.

The majority of uPVC doors are solid and therefore quite straightforward to cut into. But, if your door is made of GRP or a composite material, this may be more difficult. If you're not comfortable with this, it is recommended to consult an expert. They will also be able to tell you if your door is suitable for the installation of a cat flap double glazing flap.

You can install a cat flap into composite doors but it's important to verify with the manufacturer or a professional joiner prior to making any changes since any modifications to these doors may invalidate the warranty. If you decide to tackle the work yourself, bear in mind that it can be messy and may even be hazardous.

You'll need a grinder or saw to cut through composite doors more than only the GRP. This is a potentially dangerous job, and you will require extra care to not damage the door. It is important to note that it's more difficult to create holes in door glass than in a uPVC door or a solid wood doors.